Expanding Security Gates Kelowna: Local Installation and Support

Walk down Bernard Avenue after hours and you’ll notice a pattern. The shops that sleep peacefully behind glass don’t rely only on alarms or a wish. They pair transparency with a physical barrier that tells opportunists to move along. That’s the simple brilliance of expanding security gates: you can see through them, you can move them out of the way during the day, and you can trust them to hold the line when traffic dies down and the lights flick off.

Kelowna’s business districts, from the Cultural District to Rutland, face a mix of risks that ebb with the seasons. Summer festival foot traffic brings both energy and mischief. Winters stretch the nights, and quiet streets invite testing of handles and prying of latches. An expanding security gate isn’t a silver bullet, yet it might be the most cost-effective, flexible deterrent per dollar you can add to a storefront or service bay. If you pick the right model, mount it properly, and maintain it smartly, you’ll keep your space inviting by day and impenetrable by night.

What expanding gates do better than a locked door

A conventional door is a single point of failure. One good strike to the latch side, one pry bar, one vulnerable hinge pin, and you’ve got splintered trim and a cleanup bill. Expanding security gates, sometimes called accordion security gates or scissor security gates, spread resistance across an entire opening. They don’t pretend to be invisible. They politely yell, this is protected, try somewhere else. You keep sightlines into the store for passive surveillance and you avoid that walled-off vibe that shutters create.

Most commercial security gates share a few traits. They collapse like a concertina to a compact stack that tucks beside the doorway. They roll on casters or glide in a guide channel for smooth movement. And they lock into a receiving post or floor socket so they can’t be lifted, spread, or simply wheeled to the side by someone determined. They are steel, not aluminum, and the gauge matters more than the paint color.

In practice, you get three benefits at once. You reduce smash-and-grab attempts, you separate public paths from private inventory after hours without obstructing airflow, and you maintain compliance with fire code because properly installed expanding gates can be opened quickly from the inside without special knowledge.

Local realities: what matters in Kelowna

Helping retailers and service businesses across the Okanagan, I’ve learned the job is as much about context as it is about steel. A gate that works for a downtown café is a poor fit for a marine parts warehouse off Highway 97. Kelowna’s climate nudges the design. Temperature swings from minus teens to plus thirties will test poorly plated hardware. Road dust from summer construction finds its way into the hinges. Pollen season adds grit. If your gate will live near the exterior, you need proper galvanization or a zinc-rich coating beneath powder coat. An indoor gate in a bakery needs food-safe finishes and a smooth glide that one staffer can close in a hurry at closing time.

Crime patterns matter, too. Smash tactics on glass are quick, so the gate needs to sit close enough to the glazing that someone can’t swing a sledge with full momentum between gate and window. Where prying is common, the design should include tamper-resistant fasteners and a recessed floor pin, not an exposed padlock that can be cut in seconds. Downtown units benefit from top-track designs that resist lifting. Light industrial bays, which often have wide openings, tend to want a floor-mounted track to control long spans.

Then there are bylaws and permitting. You won’t need a permit for most interior gates mounted to steel or wood framing, but exterior installations facing the street can bump against façade guidelines, especially in heritage zones. Plan for a short consult with the city if you’re thinking about a gate that changes the street view. We’ve had approvals arrive same-week and we’ve had outlier cases stretch to a month, depending on façade complexity.

What kinds of gates actually hold up

The industry loves names, but the engineering is straightforward. Scissor or accordion security gates refers to the same expanding lattice concept. You’ll see three core families in the field:

Single-swing gates. These span smaller openings, often a single storefront door up to roughly 8 to 10 feet wide. They pivot from one side, gather to a neat stack, and lock to a steel post or opposite jamb. I use these when space is tight and staff need one-handed operation. You can add a removable bottom guide if the opening is tall and needs extra stiffness.

Bi-parting gates. Think mall stores or wide glass fronts. Two stacks meet at center and lock together, so the weight split is kinder to light walls. Bi-parting designs are easier to move across longer spans and they look cleaner because the stacks disappear left and right. For widths of 12 to 24 feet, they’re the sweet spot.

Stack-and-store systems. These are custom sections riding in a top track, sometimes with a subtle floor guide. They let you carve zones inside a space, like separating the retail floor from back stock after hours while keeping air conditioning circulating. You see these in pharmacies that must secure Schedule drugs after pharmacy hours, but still want the larger store open. They also protect kiosks within larger halls without building full walls.

Beyond structure, the details make or break longevity. A gate is only as strong as its pickets and rivets. Look for 14 to 18 gauge steel pickets, welded intersections at high-stress points, and through-bolted mounting plates. Casters should be solid or semi-pneumatic polyurethane, not brittle plastic, and should rotate cleanly under load. A steel floor pin sleeve that sits flush to the finished floor prevents tripping and keeps the pin from becoming a target. Powder coating is fine if the base metal is properly prepped. For exterior exposure, hot-dip galvanization or an equivalent corrosion treatment extends service life by years.

A quick comparison, minus the fluff

Expanding security gates: High visibility, flexible, moderate cost, great for after-hours layers and interior zoning. Rolling shutters: Strongest against heavy attack, low visibility, higher cost, more structural load, mechanical components to maintain.

That’s your trade-off. If the risk profile is smash grabs and opportunistic theft, expanding gates are efficient. If you’re protecting jewelers’ cases or cannabis storage under strict regulation after hours, a shutter or a hybrid system might be warranted.

Fitting gates to specific businesses

No two storefronts are the same. A late-night pizza shop needs airflow after close while the ovens cool, which argues for an open lattice and a lock that staff can operate one-handed when they’re tired and hustling. An electronics retailer fears quick snatch-and-runs on display goods, so they push the gate line out to block access at the glass line and keep a narrow stand-off to reduce swing momentum. A gym that runs 24/7 might gate only the office and supplement with access control on the main entrance, blending convenience with compartmentalization.

For warehouses in Kelowna’s north end, I’ve often put bi-parting gates across the interior of a loading bay. Shipments arrive at odd hours, and you can bring the overhead door up for a breeze while the gate keeps your forklift lane and inventory zone secured. Staff can stage pallets in front of the gate, then pop it open during a supervised load. It’s a tidy way to preserve ventilation without exposing high-value stock.

Pharmacies inside grocery anchors face a different problem. Regulations require the dispensary to be secured when pharmacists aren’t present, even while the main store stays open. Here, a ceiling-hung stack-and-store system closes the pharmacy area in minutes without turning the whole department into a bunker. Clear sightlines assure customers the meds are safe but the staff area is simply closed for the night.

Restaurants and tasting rooms often gate a small back bar or wine wall. The aesthetic matters. You can specify custom colors that match millwork, and you can hide gate stacks inside shallow columns. Designers sometimes balk at the look of steel, but a cleanly detailed gate with a matching color palette reads as intentional, not as an afterthought.

The nuts and bolts of installation

Let’s talk substrate. A gate is only as strong as the material you anchor it to. Wood blocking behind drywall is acceptable for light spans, but for anything more than a single door width, I want heavy-duty anchors into structural studs or steel tube recommended by your contractor. Masonry loves sleeve anchors or adhesive-set studs with proper embedment. If the wall is curtain glass with aluminum mullions, you need a structural review. I’ve used steel reinforcement plates behind mullions to spread load without distorting frames.

Floor conditions can surprise you. Tile cracks if you drill without a steady hand. Poured slab may hide radiant heat loops you do not want to puncture. If you suspect radiant, scan first. A flush floor socket for the pin keeps your entry ADA-friendly. I prefer countersunk, gasketed sockets that won’t collect a winter slush puddle that freezes the pin in place.

Top tracks need true level. Even small sags accumulate friction, and friction means your staff will hate the gate, which means they’ll stop using it or they’ll slam it, which breaks things. A decent installer will shim meticulously and test travel over the full run several times before signing off. They’ll also set stoppers that prevent over-travel, which keeps the scissor lattice from kinking when someone yanks too hard.

Locks are a minor war. Off-the-shelf padlocks become the weakest link. I prefer internal cylinder locks that capture the closing members into a receiving post, protected from bolt cutters. If the system design requires a padlock, hide it behind a shroud and keep the shackle small and boron-hardened. Train staff to lock with the gate fully extended, because partially extended gates flex and the lock alignment degrades.

Most small storefront installs finish in half a day to a day. Bigger spans and multi-gate configurations can take two days, especially if you’re coordinating with other trades or moving fixtures. The quieter the store, the smoother the job. I’ve installed more gates at 6 a.m. than at noon for good reason.

Maintenance that prevents headaches

A gate is not a set-it-and-forget-it device. It is happily low maintenance, yet a dash of routine keeps it gliding. Monthly in heavy use, quarterly in light use, vacuum or brush debris from the track and caster path. A dry silicone spray on moving joints reduces dust buildup compared to oil-based lubricants. Put a drop of light machine oil on pivot rivets twice a year, then wipe the excess to avoid drips on floors.

Once a year, check anchor tightness with a hand driver. Buildings move. Heat cycles loosen fasteners. Look for paint chips that expose steel, especially near base plates where winter salt rides in on boots. Touch up nicks with a matching coating to slow corrosion. If your staff reports a click, bind, or a sudden wobble, stop using the gate until you figure it out. A bent picket can cascade into a warped lattice if it keeps getting cycled.

The lock deserves its own check. Keys multiply and then disappear. If you inherit a mess of half-working keys, ask your security gate supplier to re-core the cylinder and reset your key plan. In mixed use sites with frequent staff turnover, electronic access control is tempting, but for gates the simple cylinder still tends to win on reliability and serviceability.

What a quality supplier brings to the table

Price tags vary. A basic single-swing gate for a standard 36 inch door opening might land in the 800 to 1,500 dollar range installed, while a bi-parting gate spanning a 15 to 20 foot storefront often runs 2,500 to 5,000 dollars depending on finish, track style, and anchoring complexity. Custom stack-and-store systems and exterior-rated galvanization bump the numbers. That’s the hardware story. The value story is different.

A good security gate supplier in Kelowna lives and dies on fit and follow-up. They bring samples you can touch, not just a brochure. They measure twice, ask about your closing routine, check for exit routes, and weigh whether your staff can open the gate while carrying a box. They consider how the stack affects merchandising, and they sketch how the gate lands without blocking a display or a handle. They work with your alarm vendor so a motion detector watching the storefront doesn’t mistake the gate’s nightly movement for an intruder. And when something scrapes, they show up, not just once, but until it’s right.

It pays to ask pointed questions during sourcing. What gauge steel and what finish? Is the galvanization hot dip or electroplated? How does the lock protect against bolt cutters? What warranty covers finish and moving parts, and for how long? Can you provide references in Kelowna for similar installs? Do you stock spare parts locally so a bent caster doesn’t sideline the gate for weeks? And the pragmatic one: who answers the phone after hours if a lock jams at 10 p.m. on a Saturday?

Fire code and safety, no shortcuts

Security only works if it doesn’t create liability. If a gate crosses a designated egress route, it must be openable from the inside without a key, special knowledge, or excessive force. That’s the phrase inspectors use. For most interior applications, you can satisfy this with a panic-release feature or by mounting the gate so that egress routes lie beyond the secured area. Exterior storefront gates that sit behind the primary exit door are generally fine, because when the store is occupied and open, the gate is stacked and locked out of the way. When the gate is closed, the store is closed, so egress doesn’t apply. Still, in multi-tenant buildings with shared corridors, make sure the gate never traps an occupied area.

Spacing matters for fire suppression. Don’t install a top track so near to a sprinkler head that it disrupts spray patterns. Maintain clearances specified by your sprinkler contractor. And don’t drill into anything above a ceiling without knowing what lives there. Sprinkler mains are less forgiving than drywall.

A small story about the right gate in the right place

A local bike shop, the kind with handmade frames on the wall and customers who know torque specs by heart, had a streak of after-hours window probing. No losses, just expensive glass scratches and one prize dented from a gloved hand trying to snake through a crack. They wanted rolling shutters for brute force, but the façade was heritage brick and the weight would have required structural support they didn’t want to add.

We set a bi-parting expanding security gate behind the glass line on a flush floor socket and reinforced the receiving post into the masonry with adhesive-set anchors. The gap between gate and glass was minimal, barely enough for a hand, which meant no swing for tools. They kept the visibility that drew evening passersby to their displays. They didn’t give up airflow on hot evenings when they kept the front door open but gated while restocking. Three years in, the only maintenance has been a caster swap after a staffer rammed a wheel with a display rack. One part, half an hour, back to smooth. The cleanup budget for after-hours mischief shrank to zero.

Why aesthetics matter more than you might think

Security that looks like punishment hurts business. If your gate design throws a shadow that says keep out, you lose casual shoppers who wander by after dinner and return in the morning. You can soften the message without losing security.

Color helps. A custom powder coat that ties into your signage reads as branding, not barricade. Thoughtful detailing helps more. Tuck the stack behind a column or a display to minimize visual clutter during open hours. If your storefront is glass-on-glass minimalism, a slim-profile lattice with tighter picket spacing keeps the visual rhythm. You can even coordinate the handle and lock escutcheon finishes with the door hardware for a cohesive look.

Interior gates inside larger retailers can almost disappear. I’ve seen pharmacy gates that read as modern screens when closed, then vanish into a wall pocket during the day. Architects will often warm to gates once they realize the geometry can complement, rather than fight, the interior language.

How to plan your project without stopping your business

The path from idea to installed gate is short if you make a few smart moves early.

Walk your space at closing time and watch your staff routine. Identify where a gate would land, where it would stack, and what it might block. This saves rework later. Photograph your opening, the ceiling above it, and the floor where anchors might land. Share dimensions that include height and any obstructions like thermostats or signage. Suppliers quote faster and more accurately with that detail.

With that groundwork, a supplier can propose options within a day or two. Site visits confirm oddities you might not notice, like a shallow wall cavity or a sloped floor. Fabrication lead times run from one to four weeks depending on finish and season. Installation scheduling is flexible. Many shops choose early morning with the doors opening on time and not a speck of dust left behind.

During install prep, move merchandise three feet back from the work zone and cover sensitive items. If drilling into tile, expect a little noise and a little water during coring. A tidy crew uses vacuum shrouds and cleans as they go. After install, insist on a quick training session for your staff: how to operate, how to lock, what to do if something feels off.

Budgeting honestly, saving smartly

Security spending is full of false economies. The cheapest gate on paper often becomes the most expensive in practice because you’ll replace it after a year of frustration. The sweet spot is durable hardware, correctly specified for your opening, paired with a local installer who answers the phone. That combination tends to cost a bit more upfront and a lot less over its life.

Expect to spend a low four figures for small openings and middle four figures for wide spans. Exterior-grade finishes add a few hundred dollars. Complicated anchoring to glass mullions or seismic bracing can tack on labor. Compare that to the deductible and downtime of one break-in. I’ve yet to see an honest comparison where a gate didn’t pay for itself after the first incident prevented.

If you’re stretching a budget, reassign funds from decorative grilles that do nothing for security to robust anchors and locks. Keep the lattice open. Save the money you would have spent on custom curves and invest in hot-dip galvanizing if your gate will see winter moisture. Ask your supplier about multi-unit discounts if you’re securing several doors across properties. And if you lease, talk to your landlord. Many property managers in Kelowna contribute to tenant improvements when those improvements reduce risk to the building.

The human factor is the last mile

The best hardware fails if people hate using it. That’s why I always try the gate with the person who closes the store most nights. If the handle is too high for shorter staff or the lock jams when you’re wearing gloves, you’ll have a problem within a week. Put the operating key on the same ring as the alarm key, and decide who is responsible for the last sweep. Write it on a closing checklist. Place a small dot on the floor where the stack should stop so nobody rams it too far and bends the caster bracket.

Training new staff takes five minutes and prevents most calls later. Show them how to extend the gate fully before locking, how to check that the floor pin is seated, and how to report a bind before it becomes damage. The staff who care about the gate end up caring more about doors, alarms, and inventory. Security culture is contagious.

Where expanding security gates don’t fit

Some spaces truly need solid shutters. Jewelry stores with high-value displays close to glass, cannabis retailers bound by specific storage regulations, or sites with proven threats from heavy tools are better served by heavier barriers. If your storefront faces strong prevailing winds and you plan to use the gate outdoors daily, a lattice will catch gusts and slam unless you add dampers and stops. In schools and public buildings, sightlines and egress requirements can complicate gate use. When in doubt, involve your fire marshal early.

If your design intent is ultra-minimalist with no visible hardware, an expanding gate might rub against the aesthetic. In that case, consider interior zoning behind the primary retail zone so the gate disappears from street view.

Finding the right partner in Kelowna

You have choices. Look for a security gate supplier with a footprint in the Okanagan, not just a Vancouver phone number. Ask for addresses of a few local installs. Drive https://conneropnx896.raidersfanteamshop.com/expanding-security-gates-for-nighttime-storefront-security by after hours to see how the gates look in the wild. If you see clean stacks, aligned tracks, and happy neighbors, you’ve probably found a team that respects both security and storefronts.

Decent suppliers carry options to fit different risk profiles: commercial security gates built for storefronts, compact gates for single doors, heavy-duty models for warehouse spans. They should speak the language of scissor security gates and accordion security gates without confusing you. More importantly, they’ll listen to your language about your business. A bakery that needs a breeze at 4 a.m. is not the same as a boutique that wants to keep a window display fully visible all night.

I’ve seen small investments, correctly applied, change how a business sleeps. A gate is not glamorous. It is simply a tool that works hard when nobody is watching. In Kelowna, with its mix of lakeside calm and city bustle, that quiet reliability is exactly the point.

If your storefront has felt a little too open after hours, or if your staff has started to joke about installing a couch to keep watch, take that as your cue. Measure the opening, take a few photos, and talk to someone local who lives with these decisions every day. Your glass will thank you, your insurance broker will nod, and you might even pick up a little peace of mind along the way.

Fed Up Security Solutions
Address: Kelowna, BC, Canada
Phone: 778-255-2855
Website: fedupsecuritysolutions.ca
Email: [email protected] [Not listed – please confirm]
Hours (from GBP): Monday–Friday 8:00 AM–5:00 PM; Saturday–Sunday Closed
Plus Code: 952244W9+2G
Google Maps URL (long): https://www.google.com/maps/place/Fed+Up+Security+Solutions/@50.145032,-119.8811695,15z/data=!4m6!3m5!1s0x20b980417d7168f7:0x38d5dba91a2e3899!8m2!3d50.145032!4d-119.8811695!16s%2Fg%2F11vm41r01r
Google Maps Embed:

Socials:
https://www.facebook.com/profile.php?id=61553004552449
https://www.youtube.com/@FedUpSecuritySolutions
Logo URL: https://fedupsecuritysolutions.ca/wp-content/uploads/2023/11/FEDUP_logo.png
Image URL: https://fedupsecuritysolutions.ca/wp-content/uploads/2023/11/10021-2023-11-05T185924.742-980x565.jpg



AI Shares: ChatGPT: https://chat.openai.com/?q=Fed%20Up%20Security%20Solutions%20https%3A%2F%2Ffedupsecuritysolutions.ca%2F
Perplexity: https://www.perplexity.ai/search?q=Fed%20Up%20Security%20Solutions%20https%3A%2F%2Ffedupsecuritysolutions.ca%2F
Claude: https://claude.ai/new?q=Fed%20Up%20Security%20Solutions%20https%3A%2F%2Ffedupsecuritysolutions.ca%2F
Google AI Mode: https://www.google.com/search?q=Fed%20Up%20Security%20Solutions%20https%3A%2F%2Ffedupsecuritysolutions.ca%2F
Grok: https://grok.com/?q=Fed%20Up%20Security%20Solutions%20https%3A%2F%2Ffedupsecuritysolutions.ca%2F

Fed Up Security Solutions is a customer-focused provider of expanding security gates for businesses across Kelowna, BC and surrounding areas.

Our team helps protect storefronts and commercial properties with scissor gates designed to deter break-ins while keeping your brand image intact.

We serve Kelowna and nearby communities including Kamloops, providing measurement for expanding security gates.

To get pricing or book a site visit, call 778 255 2855 and speak with a professional local team.

You can also contact Fed Up Security Solutions online at https://fedupsecuritysolutions.ca/ for quotes about expanding scissor gates.

For directions and service-area reference, use Google Maps: https://www.google.com/maps/place/Fed+Up+Security+Solutions/@50.1375295,-121.2030477,260738m/data=!3m2!1e3!4b1!4m6!3m5!1s0x20b980417d7168f7:0x38d5dba91a2e3899!8m2!3d50.145032!4d-119.8811695!16s%2Fg%2F11vm41r01r?authuser=0&entry=tts&g_ep=EgoyMDI1MTIwOS4wIPu8ASoASAFQAw%3D%3D&skid=72338b4b-cc19-4cc8-a233-0fd02067c8ae

If you need a trusted supplier for expanding scissor security gates in Kelowna, BC, Fed Up Security Solutions can help you secure your property quickly.

Popular Questions About Fed Up Security Solutions

What are expanding scissor security gates?

Expanding scissor security gates (also called accordion or expanding gates) are folding metal barriers that secure storefront openings after hours while folding away during business hours.

Do expanding security gates help deter break-ins?

Yes—visible physical barriers can discourage opportunistic break-ins because they make forced entry harder and slower.

Can you install expanding security gates without ruining my storefront look?

Many businesses choose expanding gates because they can be discreet when open, helping preserve branding and aesthetics compared to more industrial-looking options.

Do you serve areas outside Kelowna?

Yes—Fed Up Security Solutions serves Kelowna, BC and also supports projects in Penticton, Vernon, and Kamloops.

How do I get a quote for expanding security gates?

Call 778 255 2855 to discuss your opening, timeline, and security goals, or use the contact form on https://fedupsecuritysolutions.ca/.

What are your business hours?

Monday to Friday, 8:00 AM to 5:00 PM (closed Saturdays and Sundays).

Do you offer roll shutters too?

Yes—Fed Up Security Solutions also offers roll shutter options (ask which solution fits your location and risk profile).

How can I contact you right now?

Call: 7782552855
Website: https://fedupsecuritysolutions.ca/
Facebook: https://www.facebook.com/p/Fed-Up-Security-Solutions-61553004552449/
YouTube: https://www.youtube.com/channel/UCnV8GaVrI2bagMrZJosyqmw

Landmarks Near Kelowna, BC

Okanagan Lake — https://www.google.com/maps/search/?api=1&query=Okanagan%20Lake%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Knox Mountain Park — https://www.google.com/maps/search/?api=1&query=Knox%20Mountain%20Park%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Waterfront Park (Kelowna) — https://www.google.com/maps/search/?api=1&query=Waterfront%20Park%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

City Park (Kelowna) — https://www.google.com/maps/search/?api=1&query=City%20Park%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Myra Canyon Trestles — https://www.google.com/maps/search/?api=1&query=Myra%20Canyon%20Trestles%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Mission Hill Family Estate Winery — https://www.google.com/maps/search/?api=1&query=Mission%20Hill%20Family%20Estate%20West%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Orchard Park Shopping Centre — https://www.google.com/maps/search/?api=1&query=Orchard%20Park%20Shopping%20Centre%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Kelowna Downtown (Bernard Ave) — https://www.google.com/maps/search/?api=1&query=Bernard%20Avenue%20Downtown%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Big White Ski Resort — https://www.google.com/maps/search/?api=1&query=Big%20White%20Ski%20Resort%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

BC Orchard Industry Museum (Kelowna) — https://www.google.com/maps/search/?api=1&query=BC%20Orchard%20Industry%20Museum%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Penticton Peach — https://www.google.com/maps/search/?api=1&query=Penticton%20Peach%20Penticton%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695

Okanagan Rail Trail — https://www.google.com/maps/search/?api=1&query=Okanagan%20Rail%20Trail%20Kelowna%20BC — GEO: https://www.google.com/maps/search/?api=1&query=50.145032,-119.8811695